WS-Series Shop Vises
Never use a pipe extension to tighten lock nut
handles. This can cause the handles to bend and
over-stress the lock down bolts.
Make sure the bench top to which the vise is mounted
is properly secured.
SAFETY INFORMATION
Please Read Carefully:
Misuse of vise can cause serious injury to eyes,
hands, limbs, etc.
To ensure safety, vise must be set up and used
properly.
Before setting up and using, read, understand and
follow all instructions as outlined below.
When Setting Up the Vise:
Use proper size bolts, nuts, lock and flat washers in all
base mounting holes. Never weld base of vise to any
metal object.
When Using the Vise:
Always use vise of proper size and capacity to hold
work object.
Never use a hammer, pipe extension or cheater bar
on spindle handle of vise.
Never unscrew moveable jaw beyond the maximum
specified opening of the vise.
Never use vise as
disassembly of objects.
a
press for assembly or
Always wear eye and face protection when striking
vise-held objects or when using power tools with a
vise.
Only hand-tighten swivel base lock down nuts at the
sides of the vise.
Replacement Parts
Spindle and
Serrated Jaw
Inserts
with screws
B
Lock Nut
and Bolt
Assembly
D
Jaw
Jaw
Throat Shipping
Handle
Assembly
A
Outer
Ring
E
Stock
No.
63300
63301
63302
63304
Model Width Opening Depth
Wt.
Spindle Nut
C
No.
(in.)
4
5
6
8
(in.)
4
5
6
8
(in.)
2-3/4
3
3-1/2
4
(lbs.)
WS4
WS5
WS6
WS8
22
31
42
67
310045W
310042W
310065W
310085W
310041W
310051W
310061W
310081W
310047W
310047W
310067W
310087W
310044WA 310046WA
310054WA 310056WA
310066WA
310084WA 310086WA
310064W
Specifications were current at time of publication, but because of our policy of continuous improvement, WILTON reserves the right to
change specifications at any time and without prior notice, without incurring obligations.
WILTON
427 New Sanford Road
LaVergne, Tennessee 37086
Ph.: 800-274-6848
Part No. M-63300
Rev B 05/2014
Copyright © 2014 Wilton, a Division of JPW Industries, Inc.
|